2018 FIFA World Cup

The following items can be found on the A2Z Military Collectables website , with full descriptions, photographs and prices. This one is made of solid bronze and awarded to native bearers and servants; it has two clasps, the Tirah and the Punjab Frontier This medal is in excellent condition but all the naming has been erased; but both clasps are correctly attached and it comes on its original ribbon. A very fine medal, a superb gap filler. Original American civil war period black leather ammunition pouch. It has been well used but remains in pretty good condition for its age. The inside still has the fabric compartments for the shells, there is wear here, some of the fabric has worn through, due to use. Pre XCII 92nd Gordon Highlanders Uniform Cross Belt Plate Beautiful solid brass badge which comes in wonderful original condition although there is light wear to the high points, long lugs both in tact, measures 3. This is the 20 Mark example, part of a pad of certificates this is the last one, it comes in fair condition with a small tear on the right hand side.

WWII-Era M1 Helmets: A Beginner’s Guide

Luminous disks st man wearing disk on front of helmet Luminous or fluorescent disks were issued on a limited scale to paratroops for the Normandy jump. These small disks were attached to the front or back of the helmet so that the men could see each other in darkness. In this article I try to give a detailed view on the variations that existed, as well as the containers they were issued in.

Bales: Fixed: July: Sept: Swivel/Flexible: Oct: End: Rim Butt: Front: July: Oct: Rear.

Let’s start with some basic rules: In both cases the straps are stitched to the loops. The use of clasps is postwar. Under the brim there is a number indicating the production lot. If this number is between 0 and then we have a WW2 era shell. Wartime shells are a little taller, in a darker shade of green. However straps OD 3 can be found in rear seam late war examples too.

Postwar helmets have attached straps colour OD 7. Mid war helmets were fitted with blackend steel buckle with simplified design. Late war helmets have a blackened brass buckle with simplified design. This is true for the liner as well. First of all the producers: All other high pressure liner: Both were produced from April to November Below:

Eagle Relics

Genral Infantry M-1 helmet, an icon of the conflict thanks to the widespread media coverage and subsequently the film producers. The result is that prices are beginning to rise, but crucially for the collector on a budget, the prices of that most iconic collectable, the U. It is buyer beware out there. With this in mind, here are our top five tips to help you buy a Vietnam War era M-1 helmet online today:

is a non-political website dedicated to the study of steel helmets worn by military and civilian organizations of World War II Germany. More than pages of web text and high quality photos are ready for you to read and view. The website is .

Subject Areas Reichswehr – The Armed Forces The inter-war years preceding the rise of the Wehrmacht was a troubled one for Germany as there were few funds to support a large national military force. Read about World War I model helmets and how they were used during these difficult times. Heer – The German Army As the largest fighting branch of the Wehrmacht, the German Army Heer issued more helmets than any other arm-of-service.

Read about the various models that were used and how war brought about a change in design, color, and insignia. Kriegsmarine – The German Navy Although small compared to Allied navies, the Kriegsmarine operated not only on the sea but also on the land. Read about the various helmets that were used by naval troops from coastal artillery units to those who served onboard Germany’s famous ships.

Read about the helmets that were worn by Luftwaffe personnel both on the ground and in the air. Deutsche Polizei – Police Units On the home front and in the battle zones, German police units wore a wide selection of helmets. Read about the helmets they used in locations such as cities, rural townships, and the Russian Front. Read about the helmets they wore and the insignia they used to denote their unique status among combat troops.

Politische Gruppen – Political Groups Examine the history behind the helmets worn by non-military organizations such as the SA and DAF that maintained special protection units that closely paralleled those of the German Police.

Brodie helmet

The Ultimate Resource for Militaria Here you will find over , items of militaria for sale on-line You have most likely reached this page from a search engine. Corps Grouped into Admin Batts. Complete with Screw Thread. Set at Approx 36 Inches Width:

HELMETS & HEADGEAR – GERMAN Please Ask For More Pictures Or Details On Any Item. WW2 German M40 Large Size Helmet Here Is A Very Large Size M40 Helmet Made By Quist. Shell Size 68 US M1 Helmets & Liners – Prices From £45 British Mk2 Brodies – Prices From £20 to £

Excerpted from his book U. Combat Helmets of the 20th Century; reprinted with permission. The Model U. The adoption of a helmet by the French, British and German armies convinced the United States Army that a helmet was needed as a standard piece of equipment. This was the British Mk. There were three main reasons for the selection of the British Mk.

Production was begun on the M helmets in the fall of By the end of November , large quantities of M helmets became available for the United States Army.

Jouster2 Shooting Forums

Here is a helmet that is not falling out of the trees. As we all know; F. Quist never actually stopped producing the M40 and switched production completely to the M42 helmet. M42 Quists are pretty rare and actually the majority of ones that I have seen over the years have been re-furbished post-war as civil defense. The liner is intact and sound with the exception of a mouse-chew on one of the fingers.

Luckily; the little fellow didn’t stop for a while meal

Eagle Relics Your Best Source For Original 3rd Reich Militaria.

German Helmet Identification and Price Guide – rollinghillsdrivingrange. A close up of the heat stamps. These liners differ in that color of the HBT webbing was changed from khaki or Olive Drab 3 to a darker green color known as Olive Drab 7. On Dating college students side of the helmet there are stainless steel loops for the chinstrap. Under the brim there is a number indicating the production lot. The interior of the liner has been left unpainted and is more ‘orange’ than the High pressure liner.

It was also distributed to the Republican soldiers of the Spanish Civil War in conjunction with Soviet support of the Spanish government. If the chinstrap were worn, the head would be snapped back, causing the victim to lose balance, and leave the throat and stomach exposed to a knife thrust. In the early s, materials changed to a thicker, more flexible nylon with a rougher unbeveled rim. D bale helmets are very rare indeed and are often the object of forgery.

During the Finnish Winter War, the cold temperatures forced many soldiers to tear out the helmet’s liner so the ushankaor fur hat, would fit under the metal shell. Schlueter helmets were stamped with an S inside the inner rim with a heat stamp comprising of numbers and letters.

Collectors Militaria

World Military Collectables aims to provide a range of original, quality militaria items from the major combatant forces Drawing on the combined experience of over 50 years in the world of militaria, WMC will seek to present a regularly updated selection of items from the Victorian era to the Second World War. Predominantly featuring items from the First and Second World Wars , from medals , to uniforms, ephemera to aviation, all backed by a money back guarantee.

We attend many of the major militaria shows in the UK where we would be more than happy to acquire single items or collections similar to those on the site. Slip On Shoulder Title. A cloth embroidered slip on shoulder title for the British Expeditionary Force B.

See also WW2 Books. The first to issue helmets were the French forces followed by the British and Americans. The first US Army protective helmet was the British Mk I, the shallow-dome British helmet designed by John L Brodie and issued in to British forces. He is armed with an M1 Carbine. In , the MA1 improved version of.

History[ edit ] The M1 helmet was adopted in to replace the outdated M A1 “Kelly” helmet [3] after research was done in the s by Major Harold G. The M1 was phased out during the s in favor of the PASGT helmet , [5] which offered increased ergonomics and ballistic protection. It should be noted that no distinction in nomenclature existed between wartime front seams so-called due to the location of the seam on the helmet’s brim and post war, or rear seam, shells in the United States Army supply system, hence World War II shells remained in use until the M1 was retired from service.

In Israeli service, reserve soldiers have used the M1 helmet in combat as late as Helmet covers and netting would be applied by covering the steel shell with the extra material tucked inside the shell and secured by inserting the liner. The outer shell cannot be worn by itself. Shell[ edit ] The shell of the M1 was changed mainly in silhouette, as seen from the side, from its World War II beginnings. The rim edge of the shell has a crimped metal band running around it, which provides a clean edge.

This is usually known as the “rim”. The metal band of the rim material has a seam where the ends of the strip meet. On the earliest shells the seam met at the front. This was moved to the back of the rim in ,[ citation needed ] when the rim went from being made of stainless steel to manganese steel. On each side of the helmet there are stainless steel loops for the chinstrap.

New member, M1 Helmet info required.

Uploading of these items now ongoing. Several new items recently listed on our sister website at www. More militaria now to be uploaded onto our sister website Bridgehead Militaria so please take a look:

Top 5 Tips for Buying a Vietnam War M-1 Helmet. We all know that some iconic pieces of militaria, such as World War II German helmets that used to be affordable are now out of reach for many as demand drives prices up. So are there any iconic pieces out there that are affordable? – PR

Chinstrap Fitting the Helmet Cover First place the M1 helmet on a surface right way up and undo the chinstrap if you have one. Stretch the helmet cover over the helmet, ensuring the wings go either side of the chinstrap fittings. Put the scrim band around the cover and over the helmet. Push it down to the base of the helmet. Use the scrim band to hold the helmet cover in place while you are stretching it over the helmet.

Once the cover is in place turn the helmet upside down. Fold the wings of the cover inside the interior of the M1 helmet. Next place the helmet liner inside the interior the helmet. This holds the wings of the helmet cover inside and helps keep the cover on the helmet. Make sure you put the liner in the right way round, with the neckband fittings to the rear.

You will know which way round it goes as the liner will fit snug into the helmet. Fitting the Headband If the headband is already attached to the liner, unclip it. To dissengage the 6 clips, push the levers down You will hear them click. Place the headband around your head and adjust to a size just larger than your head.

2 WWII American M1 Helmets